- Product
-
Wear resistant protection series
-
Emulsion cleaning reduction reaction series
-
Flat silicone sealant series
-
Cable quick wear-resistant repair adhesive
-
Licheng Series
-
Lixin Intelligent Fog Forest System
-
Conveyor Belt Rapid Processing Series
-
Emergency series of leaks and spills
-
High temperature resistant protection series
-
Protective shield
Contact Us
Shanxi Beiguo Science And Technology Co., LTD
Business Consultation:+86-0354-3965688
Address: Yuci Industrial Park, Jinzhong City, Shanxi Province
product name：Tolerance compensation adhesive
origin：
application：Model: Licheng LC3601
Packaging specification: 50ml/tube, 10 tubes/set Storage period: 12 months
LC3601 tolerance compensation adhesive, low viscosity, high strength, suitable for tolerance compensation of transition or interference fit components with radial clearance ≤ 0.1mm for shaft, bearing, bearing seat, and spline fit.
Model: Licheng LC3602
Packaging specification: 50ml/tube, 10 tubes/set Storage period: 12 months
LC3602 tolerance compensation adhesive, with medium viscosity, high strength, and good solvent resistance, is suitable for tolerance compensation of transitional or clearance fitting components such as gears, rotors, and sleeves with radial clearances ≤ 0.2mm.
Model: Licheng LC3672
Packaging specification: 50ml/tube, 10 tubes/set Storage period: 12 months
LC3672 tolerance compensation adhesive, high viscosity, high temperature resistance, suitable for fitting diameter under high temperature conditions of 230 ℃
Tolerance compensation for shaft hole parts with a clearance of ≤ 0.25mm.
Model: Licheng LC3679
Packaging specification: 50ml/tube, 10 tubes/set Storage period: 12 months
LC3679 tolerance compensation adhesive, high viscosity, high strength, suitable for tolerance of cylindrical fittings such as shaft sleeves, keys, bearings, and bearing seats with radial clearance ≤ 0.5mm
Compensate or repair worn shafts, key slots, etc.
sales hotline：+86-0354-3965688
Product code | Colour | Density (g/cm³) | Viscosity (MPa.s) | Sealing gap(mm) | Maximum sealing pressure(MPa) | Initial solidification time(min) | Fully cured(h) | Working temperature(℃) |
LC3601 | red | 1.10 | 150 | 0.10 | 16 | 10 | 24 | -60~150 |
LC3602 | red | 1.10 | 1500 | 0.2 | 23 | 10 | 24 | 60~150 |
LC3672 | red | 1.15 | 8100 | 0.25 | 20 | 15 | 24 | -60~230 |
LC3679 | red | 1.13 | Semi liquid state | 0.5 | 18 | 10 | 24 | -60~150 |
