Application: LC8 669 is an environmentally friendly new rust sol that is neutral, odorless, and non irritating. It does not require polishing and can be directly brushed onto corroded conveying pipelines, equipment base surfaces, foot foundations, color steel room panels, channel steel, angle steel, factory handrails, and guardrail surfaces. The rust powder particles on the base surface are reduced to iron powder, combined with LX8669 adhesive properties, forming a protective film on the surface to prevent secondary corrosion of metal components by oxygen, water, and carbon dioxide, thereby achieving the effects of rust removal, rust prevention, and sealing. If lighting treatment is required, the product can be directly used as a primer after curing, without polishing, and can be directly sprayed with paint.

Product parameter table:

usage method:

1. Use a shovel to remove any foreign objects on the surface first.

2. Use a brush or roller dipped in glue to evenly apply it to the area to be treated. 3. The prepared product should be used up within 30 minutes.

After 45 minutes of product brushing, if the surface colloid completely turns black, it indicates that the product has completed reaction curing,

Topcoat spraying can be carried out.

matters needing attention:

After the product solidifies, it will change color when exposed to water, and the color will recover after drying.

2. The cross grid method is used for testing, and the adhesion of the cured product is level 1.