Two component, reinforced with high-performance titanium alloy, with a relative wear resistance 3-4 times that of carbon steel, high compressive strength, and good impact toughness, used for repairing worn shafts, shaft holes, splines, keyways, etc; After repair, it can meet the machining requirements.

Test conditions: Temperature: 23 ℃, humidity: 50%. When the temperature is below 10 ℃, appropriate heating measures should be taken, otherwise the curing time will be appropriately extended. When the mixing amount is greater than 200g, the operation time will be shortened.

The data in the table are typical values: