This product is composed of A/B two-component, flame retardant, and more convenient and safe for storage, transportation, and use. Quickly cure and bond at room temperature and pressure. After bonding, let it stand for 45min-60min before operating under load. Colloids are resistant to water, oil, acid and alkali, aging, and weather, suitable for bonding and repairing conveyor belt joints and conveyor belt repair strips used for transporting materials at room temperature.

usage method:

1. Cut, roughen, and remove slag from the joint according to the process requirements. Use LC8665 high-efficiency cleaning agent for surface cleaning;

2. Pour the adhesive of component A into the mixing cup, and then pour the curing agent of component B into the mixing cup. Use a mixing knife to stir evenly in a clockwise direction, and brush the adhesive evenly 2-3 times with a brush. After the first brushing, it needs to be completely dry. During this period, it can be baked with an iodine tungsten lamp or infrared lamp. When the adhesive layer is dry to the point where it is not drawing, it should be immediately bonded. Use an LC8610 roller to repeatedly press the bonding area to eliminate internal bubbles as much as possible;

3. Maintain smooth ventilation in the environment during use;

4. The prepared adhesive should be used up within 1 hour.