Contains EP reinforcement layer and semi sulfurized layer, with good wear resistance, high tensile strength, anti-static, suitable for repairing longitudinal scratches, local penetration, edge damage and tearing of conveyor belts. instructions:

1. At the repair site of the conveyor belt, use a tool knife to cut off the damaged and non adhesive parts of the conveyor belt, and remove dust, water vapor, and oil stains by roughening.

2. Remove the surface protective film of the strong repair strip on the conveyor belt and cut it to the required size.

3. Mix the LC8088/LC8099 adhesive evenly and brush it twice on the strong repair strip and the repaired area. The first time the adhesive is applied, it needs to be completely dried, and the second time it needs to be dried until the adhesive is not drawn by the hand.

4. Repeatedly roll with LC8610 roller to completely eliminate the bubbles generated by the adhesive reaction in the strong repair strip of the conveyor belt.

5. The startup running time can refer to the performance of the adhesive.