Matters needing attention

1. If the repair area of the conveyor belt cannot be leveled, when using a glue adjustment knife to adjust the glue, the mixing time can be extended in the glue adjustment cup until there is resistance in the mixed glue material, and then poured to the repair area and scraped flat with a scraper.

2. LC8600 conveyor belt should be repaired in a timely manner. The adhesive is a reactive material that is very sensitive to water. Once the AB component is turned on, it should not splash water, otherwise it will foam and affect the quality of belt repair.

3. When the ambient temperature is below 0 ℃, the curing time of the repair adhesive will be longer. In this case, the two components of the repair adhesive should be heated appropriately (electric heating plate or hair dryer can be used), and the heating temperature should not exceed 60C.

4. The product should be stored in a room with heating during winter, and heated in hot water before use to remove crystallization.